欢迎光临江阴市昌盛药化机械有限公司

收藏本站

联系我们

江阴市昌盛药化机械有限公司
免费咨询热线

0510-86341342

  • 详细介绍
  • 技术参数
  • 产品配置表

工作原理:

SE系列螺杆挤出造粒机分单螺杆(SES)和双螺杆(SET)型,挤出形式有前出料和侧出料两种。经混合、捏和的湿物料或软化点(一般指小于50℃)物料在螺杆输送、挤压作用下,从机头开孔模板挤出,再经过干燥或冷却得到颗粒成品,从而实现将粉状产品改变为均匀的颗粒产品的目的。颗粒形状为圆柱状,成品颗粒直径可由模板开孔孔径调节和控制;侧出料为0.7-3.0mm,前出料为1.5-12mm,成粒率≥95%

Working Method:

SE  series of screw type extruding pelleter in clued single-screw type and double-screw-type. Two models of front and side for material to be extrudedWET material or material with low melting point  (general means <50C0) after being kneaded and mixed shall be extruded out from mould plate at the head of the plant due to being conveied and pressed by screws, and then be dried or cooled to from end products of particles so as to complete the course of Changing material from powder to particle.  The shaoe of grain is cylindrical. The dia of end grain can be choosed and controlled by means of changing the dia of holes in the mould plate: for side type is 0.7-3.0mm,for front type is 1.5-12mm.The rate of end product is equal to or more than 95%.

应用范围:

广泛适用于橡胶助剂、食品添加剂、塑料助剂、催化剂、农药、燃料、颜料、日化、制药等行业需造粒的产品。

Applied scope:

The plant is widely applied to material needs granulating such as Rubber auxiliary , Food Additive Plastic Auxiliary , Catalyzer, Agrochemicals, Dye, Pigment, daily chemicals, medicine etc .

江阴昌盛药化机械有限公司(江阴市昌盛制药机械厂),位于江阴市文林镇,东连上海、南临苏州、无锡,地处“黄金通道”之称的沪宁高速公路无锡东。本公司主营干燥机,混合机,制粒机,粉碎机等药化设备。本公司有三十年的机械制造历史、技术力量雄厚、工艺先进、设备齐全、由于生产及市场需要,本公司聘请了制药、化工、食品机械方面的多名专家及工程技术人员,发展了一系列的制药及化工机械设备,主要产品有中药粉碎机、筛粉机、混合机、制粒机、干燥机等多种系列产品,为我国的制药及化工、食品等行业的机械装备更新换代作出了一定的贡献!产品质量得到广大用户的一致好评。


地区分销